Type: Driver
File Name:
File Size: 5.0 MB
16 (4.42)
Downloads: 4
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* (*Free Registration Required)

Download Now

These limits are designed to provide reasonable protection against harmful interference in a residential installation.


This Biostar A57A2 AMD RAID generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. All the brand and product names are trademarks of their respective companies. Specifications in Other Languages Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on the edge, do not try to bend or flex the board.

Download AMD SATA AHCI controllers Driver

Loose parts will cause short circuits which may damage the equipment. Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit 1. The package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative. Rear Panel Connectors Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be Biostar A57A2 AMD RAID by software. However, when connecting external microphone to the audio port, please use the Line In Blue and Mic In Pink audio jack. Locate the CPU socket on the motherboard Step 2: Pull the socket locking out from the socket and then raise the lever up to a degree angel.

Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. Biostar A57A2 AMD RAID

Biostar Windows Drivers Download Free Driver Downloads and Driver Updates

The CPU will fit only in the correct orientation. The CPU fits only in one correct orientation.

Hold the CPU down firmly, and then close the lever to locked the position 2. Place the heatsink and fan assembly onto the retention frame.


Match the heatsink clip with the socket mounting-lug. Hook the spring Biostar A57A2 AMD RAID to the mounting-lug. On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops. For proper installation, please kindly refer to the installation manual of your CPU heatsink. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the Biostar A57A2 AMD RAID while matching the black wire to pin 1. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND.

  • Latest Biostar A57A2 Motherboard Drivers
  • Biostar A57a2 Motherboard Fm2 Interface Apu Amd A57 Support A10x4 APED
  • Biostar A57A2 Owner's Manual
  • Biostar TA75A+
  • Download AMD SATA AHCI controllers Driver

DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. If the DIMM does not go in smoothly, do not force it.


Pull it all the way out and try again. Install memory module of the same density in pairs, shown in the table. Biostar A57A2 AMD RAID Gen2 supports a raw bit-rate of 5. Install an Expansion Card You can install your expansion card by following steps: Read the related expansion card's instruction document before install the expansion card into the computer. Remove your computer's chassis cover, screws and slot bracket from the computer. Place a card in the expansion slot and press down on the card until it is completely seated in the slot. Replace your computer's chassis cover. Power on the computer, if necessary, change BIOS settings for the expansion card. Install related driver for the expansion card. Please carefully follow the procedures to avoid damaging the motherboard.

Remove AC power line. Wait for five seconds. Power on the AC. Insufficient power supplied to the system may result Biostar A57A2 AMD RAID instability or the peripherals not functioning properly.

Download AMD SATA AHCI controllers Driver

Free Download Biostar A57A2 Ver. 6.x AMD RAID Preinstall Driver for XP (Motherboard). AMD Socket FM2 A57A2 Ver. 6.x gaming motherboard's spec: Supported Socket FM2 processors AMD A-series/ E2-series processor; Supported AMD Mutil.

Other Drivers