Type: Driver
File Name:
File Size: 39.4 MB
5 (4.65)
Downloads: 5
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now

LED blinks to show activity on the Fibre Channel port numbered 0. During very high activity, the LEDs appear to be steadily lit. The mounting holes on the "L"-bracket fit a standard inch rack using a centered 1. Be careful Atto FibreBridge 2400RD installing it a rack. The earth ground connection must be maintained when supply connection is other than direct connection to Atto FibreBridge 2400RD branch circuit. Ultra, Ultra2 or Ultral However, you may use externally provided software striping to create a RAID 0 group that includes devices from both SCSI busses to increase overall performance.

If slower devices are mixed with faster Ultral60 devices, the bus will communicate at the Atto FibreBridge 2400RD of the slowest device, thus wasting the performance capabilities of the faster devices. It is important to keep cable lengths as short as possible to ensure the highest signal quality and performance.

These cable lengths include the wiring inside the devices. It is recommended to use a sequential ID starting at 0 for each device.

Прайс-лист группы компаний ТИМ - TIMcompany

If you wish to mix devices of different SCSI speeds on the bridge, it is best to place them on separate busses. Each bus is independent so each can operate at different speeds. The bridge is terminated internally. Fibre Channel technology offers a variety Atto FibreBridge 2400RD cabling options including standard copper, equalized copper, multimode fiber optic, and single mode fiber optic.

ATTO FibreBridge 2400C/R/D

The type of cable to use varies depending upon the application, environment and distance. See Chapter 8 of this manual.


Make sure all cables are anchored securely at both ends with the proper connectors. ATTO FibreBridge Services can be used to configure Atto FibreBridge 2400RD tune the bridge for many different environments and applications, update the firmware, configure the addresses of the connected SCSI devices, monitor internal power and temperature status, report on hardware diagnostics and log failures. Three avenues are available: All CLI commands except Menu are supported. Refer to Chapter 7.

Atto – IT Hardware Parts Catalog

Most FibreBridge configuration options are available. A gender changer or DB-9 to DB converter may be needed depending on the cables being used. Enable the computer's serial port and initiate a terminal emulation link. Set the following serial parameters in your terminal program: Bits per second: None, Stop Bits: Echo should be on. You may use a graphical interface BridgeToolscommand Atto FibreBridge 2400RD interface CLI or menu system as explained in the rest of this manual.


The default IP address is You don't need to do anything more if you want to use the default, but these parameters Atto FibreBridge 2400RD be changed using the RS port or Telnet. The name can be no more than eight characters.

ALi M3309 MPEG(v1.25) AcceleratorComputer companies started in 1988
HP Mini 110-1031NR Notebook Broadcom WLANAsk a Question
Asus N53Jf Chicony CameraRead the ATTO Technology ATTO FibreBridge 2350C manual - avoid problems
DC-133 Virtual RAID ProcessorProduct Features
MSI B75MA-E33 Super ChargerReady your enterprise for the API revolution

Choose a meaningful name to make identification of the unit easier. To save the configuration: User s Manual. The ATTO FibreBridge R/D is a 4-Gigabit Fibre Channel Atto FibreBridge 2400RD SCSI bridge offering the. The ATTO FibreBridge R/D is a high performance bridge adding.

ATTO FibreBridge R/D - storage controller - Ultra SCSI - 4Gb Fibre Channel overview and full product specs on CNET.

Other Drivers