Type: Driver
File Name:
File Size: 11.6 MB
18 (4.44)
Downloads: 15
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed ASRock IMB-191 Realtek Audio a commitment by ASRock.


ASRock assumes no responsibility for any errors or omissions that may appear in this documentation. With respect to the contents ASRock IMB-191 Realtek Audio this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

ASRock IMB User Manual (Page 21 of 58)

In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product. Operation is subject to the following two conditions: When you discard the Lithium battery in California, USA, please follow the related regulations in advance. Onboard Headers and ASRock IMB-191 Realtek Audio In this manual, chapter 1 and 2 contain introduction of the motherboard and stepby-step guide to the hardware installation. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.

In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. Line-out 0 0 4 2 x 2. System Panel Header Front Panel Audio Header Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. Do not over-tighten the screws! Doing so may damage the motherboard.

Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or ASRock IMB-191 Realtek Audio the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply.

Installing an expansion card Step 1.

Steatite Embedded Industrial Computers, Rack Mount PCs & Touchscreen PCs.

Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start ASRock IMB-191 Realtek Audio installation. Remove the system unit cover if your motherboard is already installed in a chassis.

Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card to the chassis with screws. Replace the system cover.


To clear and reset the system parameters to default setup, please turn ASRock IMB-191 Realtek Audio the computer and unplug the power cord from the power supply. Please be noted that the password, date, time, user default profile and MAC address will be cleared only if the CMOS battery is removed.

  • Ask a Question

ATX Mode see p. Do NOT place jumper caps over these headers and connectors.

ASRock IMB-170 User Manual Page 21

Placing jumper caps over the headers and connectors will cause permanent damage of the ASRock IMB-191 Realtek Audio Though this motherboard provides 4-Pin chassis fan Quiet Fan support, the 3-Pin chassis fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin chassis fan to the chassis fan connector on this motherboard, please connect it to Pin This feature requires a chassis with chassis intrusion detection design.

Acer Aspire 5738ZG SATA
ACTi ACD-2000Q

Active Case Open Open: Normal 2 pin COM1: Please refer to below table for the pin definition. You may refer to page 36 for details. Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins ASRock IMB-191 Realtek Audio connecting the cables.

IMB Socket LGA for IntelĀ® ASRock IMB-191 Realtek Audio i7 / i5 / i3 / CeleronĀ® (Skylake-S) DisplayPort. - 0. Ethernet. - 2. USB. - 4 x USB Audio. - 2 (Mic-in, Line-out).Missing: Realtek. Free Download ASRock IMB Realtek Audio Driver (Sound Card).

Other Drivers