Type: Driver
File Name:
File Size: 12.8 MB
17 (3.19)
Downloads: 17
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* (*Free Registration Required)

Download Now

Before you ASRock 4CoreDX90-VSTA R2.0 VGA Dual ASRock 4CoreDX90-VSTA R2.0 VGA Memory Technology, make sure to read the installation guide of memory modules on page 11 for proper installation. If you want to adopt DDR3 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules. The maximum shared memory size is defined by the chipset vendor and is subject to change. Power Management for USB 2. English 7 English It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows environment.


Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. The voltage regulator can reduce the number of output phases to improve ASRock 4CoreDX90-VSTA R2.0 VGA when the CPU cores are idle. In other words, it is able to provide exceptional power saving and improve power ASRock 4CoreDX90-VSTA R2.0 VGA without sacrificing computing performance. Please visit our website for the operation procedures of Intelligent Energy Saver. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility.

It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings. Your friends then can load the OC profile to their own system to get the same OC settings as yours!

Please be noticed that the OC profile can only be shared and worked on the same motherboard. Although this motherboard offers stepless control, it is not recommended to perform over-clocking.


While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Before you install the motherboard, ASRock 4CoreDX90-VSTA R2.0 VGA the configuration of your chassis to ensure that the motherboard fits into it.

Asrock 4CoreDX90-VSTA R2.0 Free Driver Download (Official)

Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Before you install or remove any component, ensure that the power is switched off or the power ASRock 4CoreDX90-VSTA R2.0 VGA is detached from the power supply. Unplug the power cord from the wall socket before touching any component.

  • Solvusoft: Microsoft Gold Certified Company
  • ASRock 4CoreDX90-VSTA VGA driver download free (ver. 15.­51.­10.­01)
  • ASRock 4CoreDX90-VSTA SATA RAID οδηγός λήψη δωρεάν (ver. 5.­40A)

To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that ASRock 4CoreDX90-VSTA R2.0 VGA with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Unlock the socket by lifting the lever up to a 90 o angle. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.

Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. The lever clicks on the side tab to indicate that it is locked.

You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the ASRock 4CoreDX90-VSTA R2.0 VGA are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Otherwise, it will operate at single channel mode.

If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. Unlock a DIMM slot by pressing the retaining clips outward. The DIMM only fits in one correct orientation. Installing an expansion card Step 1. Before installing the expansion card, please ASRock 4CoreDX90-VSTA R2.0 VGA sure that the power supply is switched off or the power cord is unplugged.

Manutenç@: Dezembro

Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the bracket facing the slot that ASRock 4CoreDX90-VSTA R2.0 VGA intend to use. Keep the screws for later use.

Align the card connector with the slot and press firmly until the card is completely seated on the slot. 4CoreDXVSTA R Integrated VIA® Chrome9 HC Graphics, DirectX VGA, Max. shared ASRock 4CoreDX90-VSTA R2.0 VGA MB; Untied Overclocking: During Overclocking. Integrated VIA Chrome9 HC Graphics, DirectX VGA, Max. shared memory MB; 1 x PCI Express x SATA Gb/s connectors, support RAID 0, 1, JBOD and Hot Plug functions; CH Windows Vista™ 20 pin ATX power connector.

Other Drivers