Type: Driver
File Name: zdesigner_zd410_30308.zip
File Size: 20.0 MB
30 (3.84)
Downloads: 15
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* (*Free Registration Required)

Download Now

Download the Star TSP driver. When prompted, save the file to your desktop.


Follow the installation prompt: Optional Click Next and enter your user name and organization. Click Nextselect Typical Installationand then click Next again.

Click Finish. Ensure that ZDesigner ZD410-203dpi ZPL printer is turned on and has paper loaded. Plug the printer's USB cable into an available port on your computer. Windows installs the printer.


The installation is complete when you see Your device is ready to use. If you're having trouble, open the file from Step 2 again and run the Start Configuration Utility in line mode. For Windows 8 only: You may need to print a Windows test page before the printer works in Point of Sale. Star TSP Note: TSP does not work on Windows Unzip the file: From the icon bar, ZDesigner ZD410-203dpi ZPL Extract. Click Extract to unzip the drivers to the default location. You can use this location or save the driver elsewhere.

Windows will find the drivers automatically during installation. Ensure your printer is turned on and has ZDesigner ZD410-203dpi ZPL loaded.

Installing your Zebra ZD manually on Windows – Lightspeed Retail

When you see the message ZDesigner ZD410-203dpi ZPL device is ready to usethe installation is complete. Windows installs the driver automatically in the background. When you see the message Your device is ready to use the installation is complete. Zebra Tag Printer Note: Download the Zebra ZD Driver. Double click the newly downloaded Zebra icon labeled zdcertified. This will run the driver install utility, follow the prompts and click Next all the way through to complete the utility. Select USB for the port and click Next. Try the following troubleshooting steps: Reset Button Troubleshooting Printer Diagnostics Reset Button In addition to the power on configurations described previously, the ZD has a dedicated reset button located on the bottom of the printer which can be pressed with a paperclip or similar small object.

Pressing the button has the following results based on the length of the button press Communication Diagnostics Test NE indicates noise. See the Zebra Programming Guide for more information about this command. Compare your results to the examples shown earlier in this section. If the sensitivity of the Page If the distances are not the same, the printer may be having difficulty determining where the gaps are ZDesigner ZD410-203dpi ZPL. Advanced Mode You may need to perform Manual Media Calibration several times, moving the media sensor, until the printer completes the calibration process and returns to the READY state. To return to the maximum print width setting, allow the printer to proceed without pressing the FEED button. Manual Print Darkness Adjustment The printer will then repeat the pattern with the next darkness level.

Maintenance Maintenance This section provides routine cleaning and maintenance procedures. Cleaning Water-dampened cloth.

How to Set up a Zebra ZD410 Sticker Printer for Stickers

As needed. Cleaning The Printhead Rub the cleaning pen across the dark area of the printhead.

Clean from the middle to the outside. This will move adhesive transferred from the edges of media to the outside of media path.


Wait one minute before ZDesigner ZD410-203dpi ZPL the printer. Find information on your Zebra ZD Desktop Printer drivers, software, support, Version - this application includes the latest ZDesigner certified  ‎How-To Videos · ‎Drivers. ZD Direct Thermal Printer — These printers support ZPL ™ and EPL Zebra printer programming languages and a wide.

Other Drivers