AIRTIES WAV-180 DRIVER DETAILS:
|File Size:||35.7 MB|
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* (*Free Registration Required)|
AIRTIES WAV-180 DRIVER
The left-hand side displays the main menu and the right-hand side shows descriptive information.
AirTies WAV-180 advanced management interface contains 12 main menu items as described in the following table. Configures the radio frequency, SSID, and security for wireless communications.
Screenshots - Airties - Wav (Airties Turkish Firmware) ™
Configures Address Mapping, virtual server and special applications. Sets the routing parameters and displays the current routing table. Configures a variety of security and specialized functions including: Configure the file server, FTP service and printer server functions. Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, and the hardware version and serial number. Shows the security and DHCP client log. If you lost the password, or you cannot gain access to the user interface, press the blue AirTies WAV-180 button on the rear panel, holding it down for at least 10 seconds to restore the factory defaults.
Airties WAV-180 Manuals
There is no password by default. Enter a maximum Idle AirTies WAV-180 Out in minutes to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum idle time, it will perform system logout, and you have to log in again to access the management interface. However, you can also manage the VoIP Router from a remote host by entering the IP address of a remote computer on this screen.
If you check Enable and AirTies WAV-180 an IP address of 0. If you type a web address into your browser, such as www. However, if there is a DNS server that you would rather use, you need to specify the IP address here. Enter the name of the VoIP Router. This option allows you to enable or disable the DHCP server function. By AirTies WAV-180 DHCP is enabled.
Do not include the gateway address of the VoIP Router in the client address pool. If you change the pool range, make sure the first three octets match the gateways IP address, i. AirTies WAV-180 home networks this may be set to Forever, which means there is no time limit on the IP address lease.
If your network uses a domain name, enter it here. Otherwise, leave this field blank. This is done by setting the VLAN binding.
Enter a description for the VLAN group. IP Address: Subnet Mask: NAT Domain: Set NAT Domain to AirTies WAV-180 or public. IGMP Snooping: Enabling it will turn on the feature that allows an Ethernet switch to listen in on the IGMP conversation between hosts and routers.
AIRTIES WAV DRIVER
IGMP Querier: Enabling this function will send out periodic IGMP queries. UPnP enables seamless proximity network in addition to control and data transfer among networked devices in the office, home and everywhere within your AirTies WAV-180.
- AirTies WAV Driver for Windows Xp Download - Modem Deals
- AIRTIES WAV Wireless ADSL2+ VoIP Modem
- Airties WAV Manuals
- Airties Wav-281 Um En
- AIRTIES WAV 180 DRIVER
- Screenshots - Airties - Wav-180 (Airties Turkish Firmware)
UPnP allows the device to automatically: Check the Enable radio button to activate this function. To configure this function, all you need to do is to enable the wireless function, define the radio channel, the AirTies WAV-180, and the security options. You may configure the VoIP Router as a wireless access point based on scheduled rules. Each access rule may be activated at a scheduled time. Be sure you configure all of its clients to the same values. Airties - Wav (Airties Turkish Firmware) Screenshot Database AirTies WAV-180 screenshots have small distortions that were used to blur out personal info such as IP.
Airties WAV Pdf User Manuals. View online or download Airties WAV User Manual.