Type: Driver
File Name:
File Size: 17.2 MB
6 (3.12)
Downloads: 7
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

The antennas used for this transmitter must be installed to provide a TP-Link NC220 v1 Camera distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Le fonctionnement est soumis aux deux conditions suivantes: This device has been designed to operate with the antennas listed below, and having a maximum gain of 3 dbi.

Antennas not included in this list or having a gain greater than 3 dbi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.


To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e. This Class TP-Link NC220 v1 Camera device meets all the requirements of the Canadian interference-causing equipment regulations. Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.

Download TP-Link NC V1 Network Camera Firmware for OS Independent

Don t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations.

TP-LINK NC Wireless N Day/Night Cloud Camera - MSY Online

This product can be used in the following countries: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the TP-Link NC220 v1 Camera of Council Directives: Person responsible for making this declaration: Please read this guide carefully before operation. Bold font indicates a button, a toolbar icon, menu or menu item.

Symbol in this Guide: Description Ignoring this type of note might result in a malfunction or damage to the device. NC has a complete system with a built-in CPU and web server that transmits high quality video images, which TP-Link NC220 v1 Camera fully meet the need of your small office or home s security and surveillance. NC is an affordable and fully scalable surveillance camera.

NC220. Day/Night Cloud Camera, 300Mbps Wi-Fi REV1.0.0

Because the camera can be added to your existing local area network LAN with TP-Link NC220 v1 Camera stable high speed Wi-Fi connection, you will potentially save a lot from unnecessary cabling. With wireless extender feature, it can also be used as a Wi-Fi range extender to easily expand your Wi-Fi network. NC TP-Link NC220 v1 Camera be accessed remotely, and controlled from any computer over your local network or through the Internet via a web browser. NC is a complete and cost-effective home or office security solution for it comes with remote monitoring and motion detection feature. NC is a cloud-based Wi-Fi video monitoring device with free live streaming and remote viewing, which makes it easy to stay connected with what you care most wherever you are. The camera has a built-in internal photodetector.


It is used to identify day or night. The camera has a built-in internal microphone. This microphone is hidden in the pinhole TP-Link NC220 v1 Camera on the front panel. The camera has boot up, but is not connected to any network. The camera is in firmware upgrade procedure.

The camera is connected to a network or is transferring data. The camera is connecting to a network by WPS function. This process will last in the first 2 minutes.

The camera has boot up. The camera failed to be added to TP-Link NC220 v1 Camera network by WPS function. The camera has been successfully added to a network by WPS function. The power jack is where you connect the AC adapter to the camera. Then release the button and wait the camera to reset to its factory TP-Link NC220 v1 Camera settings. Used as WPS button: These holes are used for heat dissipation. Download for TL-NC V1 ; How to update the Firmware of a TP-Link Camera using the tpCamera App ; How to use. Download for NC V1 ; How to upgrade firmware on NC series cameras? How to register a TP-Link Cloud Account for Cloud Camera?

TP-LINK TL-WR842ND USB Printer ControllerWant to add to the discussion?
BCM IN440ZXPayment Result
AMD Radeon X1550 GraphicsTp Link Nc220 V1 Camera Firmware 160321 Driver Details:
ASRock 960GMU3S3 FX Nuvoton CIRTP-Link NC220 V1 Network Camera Firmware - Cambridge-igcse-global-perspectives-0457-website

Other Drivers