Type: Driver
File Name:
File Size: 29.5 MB
12 (3.75)
Downloads: 14
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now

Instances of Non-Warranty 1. Damage due to natural disaster, accident or human cause. Damage as a result of violating the conditions recommended in the user manual.

Damage due to improper installation. Damage due to use of uncertified components. Damage due to use exceeding the permitted parameters.

GAGMF-DS2 (Rev. 3.x) Motherboard - GIGABYTE

Note 2 Due to the limitation Gigabyte GA-945GMF-DS2 (rev. 2.0) Windows bit operating system, when more than 4 GB of physical memory is installed, the actual memory available for the operating system will be less than 4 GB; Windows bit operating system doesn't have such limitation. Please make sure that the motherboard supports the CPU.


Please take note of the pin 1 marking the small triangle on the CPU. If this occurs, please change the insert direction of the CPU. Please set the CPU host frequency in accordance Gigabyte GA-945GMF-DS2 (rev. 2.0) the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to Gigabyte GA-945GMF-DS2 (rev. 2.0) hardware specifications including the CPU, graphics card, memory, hard drive, etc Installation of the CPU Check the CPU pins to see that none are bent.

Move the socket lever to the unlocked position as shown in Fig. The pin 1 location is designated on the CPU by a small triangle that corresponds to a triangle marking on the socket as shown in Fig.

Gigabyte GA-945GMF-DS2 (rev. 2.0) BIOS download free (ver. F2)

Align the CPU to the socket and gently lower it into place. Do not force the CPU into the socket. Once the CPU is positioned into its socket, place one finger down on the middle of the CPU and gently press the metal lever back into its original position.

The CPU will not fit if positioned incorrectly. Rather than applying force, please change the positioning of the CPU. Install all the CPU cooler components Please refer to the cooler manual for detailed installation instructions.

  • Gigabyte GAGME-DS2 (rev. ) : Best Drivers
  • Memory Finder - Server, Desktop/Laptop Memory Kingston
  • Motherboards GIGABYTE GAGMF-DS2 (rev. ) user's manuals in pdf
  • GA-M61VME-S2 (rev. 2.0) AMD Socket AM2 Processor Motherboard
  • Warranty & Support
  • Side Refine Panel
  • Gigabyte GA-945GM-DS2 (rev. 2.0) Инструкция по эксплуатации онлайн [26/80]

To prevent such an occurrence, it is suggested that either thermal tape rather than heat paste be used for heat dissipation or using extreme care when removing the CPU cooler Hardware Installation 14 English Installation of Memory Before installing the memory modules, please comply with the following conditions: Please make sure that the memory used is supported by the Gigabyte GA-945GMF-DS2 (rev. 2.0). It is recommended that memory of similar capacity, specifications and brand be used.


Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. Memory modules have a foolproof insertion design.

Gigabyte GAGMF-DS2 Manuals

A memory Gigabyte GA-945GMF-DS2 (rev. 2.0) can be installed in only one direction. If you are unable to insert the module, please switch the direction. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.


Then push it down. Reverse the installation steps when you wish to remove the DIMM module.

Gigabyte GA-945GMF-DS2 (rev. 2.0) Dual Channel mode will not be enabled if only one memory module is installed. Support Intel® Core™2 Extreme/ Core™2 Duo/ Pentium® D Processor Dual Channel DDR2 for advanced system performance Integrated Intel® Graphic. Free Download Gigabyte GAGMF-DS2 (rev. ) Realtek LAN Driver for Vista (Network Card).

Other Drivers