ADDI-DATA APCI-1648 DRIVER DETAILS:
|File Size:||15.0 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* (*Free Registration Required)|
ADDI-DATA APCI-1648 DRIVER
Make sure that you do ADDI-DATA APCI-1648 forget or skip any step! We are not liable for damages resulting from the wrong use of the board.
Pay attention to the following symbols: Designates hints and other useful information. Designates a possibly dangerous situation.
Correct handling PCI slot types Inserting the board Fastening the board at the back cover Connection of the screw terminal panel PX Block diagram of the APCI Serial number The board must not be used for safety related functions, for example for emergency stop functions. Uses of the board beyond these specifications ADDI-DATA APCI-1648 considered as improper ADDI-DATA APCI-1648.
The manufacturer is not liable for damages resulting from improper use. The board must remain in its anti-static packaging until it is installed. Please do not ADDI-DATA APCI-1648 the identification numbers of the board or the warranty claim will be invalid. The PX screw terminal board allows the connection of the digital signals with a shielded cable.
ADDI-DATA APCI-1648 The connection with our standard cable ST complies with the following specifications: Correct handling Hold the board cautiously at the outer end and at the slot bracket. Do not touch the surface of the board! ADDI-DATA APCI-1648
The limit values as set out by the European EMC directive for an industrial environment are complied with. The respective EMC test report is available on request. Dimensions L x W Standard cable ST Screw terminal board The connection lines must be installed in ADDI-DATA APCI-1648 a way that they are protected against mechanical loads. Bus speed The TTL inputs and outputs are not optically isolated.
PCI TTL I/O boards APCI-1648 and APCI-1696
Please make sure that no signal from the ADDI-DATA APCI-1648 is connected to the inputs and outputs when the PC system is switched off or being booted up or shut down. This can be realised by means of a relay or tri-state circuit between the peripherals and the TTL inputs and outputs. TTL input level compliant Max.
- PCI boards - ADDI-DATA USA
- ADDI-DATA Windows 7 Ethernet / Network Driver Downloads
- Digital I/O card / TTL / PCI - APCI, APCI - ADDI-DATA
- ADDI-DATA Windows 7 Ethernet / Network Drivers Download
- Technical information Change to RoHS-compliant - ADDI-DATA
- Log in to Wiley Online Library
- ADDI-DATA Network Drivers Download
DC input signal DC output signal Please follow the safety precautions! An improper handling of the board may cause property damage and injury. Pull the PC mains plug from the socket. Open your PC as described ADDI-DATA APCI-1648 the manual of the PC manufacturer.
PCI slot types ADDI-DATA APCI-1648 the back cover from the selected slot. For this, follow the operating instructions provided by the PC manufacturer! Keep the back cover in a safe place.
You will need it if ADDI-DATA APCI-1648 remove the ADDI-DATA APCI-1648. Provide for potential equalisation. Take the board out of its protective pack. Inserting the board Fasten the board to the rear of the PC housing with the screw which was fixed on the back cover.
Fastening the board at the back cover Tighten all loose screws. Before using ADDI-DATA APCI-1648 board and in case of malfunction during operation, check if there is an update manual, driver available.
(PDF) Bivalent molecular probes for dopamine D2-like receptors Harald Hübner -
Current data can be found on our website or contact us directly. The ADDI-DATA APCI-1648 TTL I/O boards APCI and APCI have 48 or 96 digital TTL I/O. 8 lines (1 port) can be configured as inputs or outputs. The ADDI-DATA APCI-1648 is. 48 or 96 digital TTL inputs and outputs. Contact us! enquiry Make an enquiry · Overview MSX-E intelligent Ethernet systems · Digital systems.