Type: Driver
File Name:
File Size: 10.1 MB
17 (3.39)
Downloads: 7
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* (*Free Registration Required)

Download Now


For example: Now, you have successfully share your OC setting profile with your friends. EuP, stands for Asrock A780LM-S SATA2 Using Product, was a provision regulated by European Union to define the power consumption for the completed system. With the great quantity and the popularly Asrock A780LM-S SATA2 of the electrical products nowadays and the continuously increasing of the electrical products categories in the following 20 to 30 years, European Union decided to establish an effective strategy to solve the energy consumption problem. That is, according to EuP, the total AC power of the completed system shall be under 1. How to setup an EuP system? Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3.


Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap Asrock A780LM-S SATA2 the socket while pressing on center of PnP cap to assist in removal. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.

ASRock > Page Not Found

Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.

Secure load lever with load plate tab under retention tab of load lever. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure Asrock A780LM-S SATA2 the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Apply thermal interface material onto center of IHS on the socket surface. Place the heatsink onto the socket.

Motherboard ASRock Dual-SATA2 Drivers, utilities and instructions t

Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Asrock A780LM-S SATA2 with remaining fasteners. If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard.

Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Unlock a DIMM slot by pressing the retaining clips outward. Asrock A780LM-S SATA2

ASROCK P4VM900-SATA2 Installation Manual

PCI slots: AGP slot: The AGP slot is used to install a graphics card. Please do NOT use a 3. PCI Express Graphics slot: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Align the card connector with the slot and press firmly until the card is Asrock A780LM-S SATA2 seated on the slot.

Asrock Sound Card Drivers Download

For Windows® bit OS with bit CPU, there is no such limitation. 4 x SATA2 Gb/s connectors, support RAID (RAID 0, RAID Asrock A780LM-S SATA2 RAID 10 and JBOD), NCQ. ALM. AM3 CPU Ready; Integrated AMD Radeon graphics, DX10 class 6 x SATA2 Gb/s connectors, support RAID (RAID 0, RAID 1 and JBOD).

Other Drivers