EXTRON MLC PLUS 50 ETHERNET CONTROLLER DRIVER DETAILS:
|File Size:||21.7 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
EXTRON MLC PLUS 50 ETHERNET CONTROLLER DRIVER
It also includes ports for bidirectional serial control, IR output, relays, digital input, and except for the MLC Plus 50 volume control. Each MLC Plus is shipped with a mud ring.
This guide provides instructions for an experienced installer to install an MLC Plus Series controller and to create a basic configuration. Global Configurator and other useful software applications are available at www. Get Ready Use the following check list to prepare for the installation. Download and install the latest version of the following: GC includes the Toolbelt feature also available as stand-alone software and a way to upgrade the firmware of the controller. Obtain network Extron MLC Plus 50 Ethernet Controller for the unit from the network administrator.
You will need the following details for each IP Link Pro device: The end user or installer must furnish the junction box. Read any installation instructions and UL guidelines that come with the mounting devices, protect the mounting surface to prevent damage, then install the box or mud ring in the opening at the installation site.
MediaLink Plus Controllers Extron
When you run cables to the mounting location, leave enough slack for device installation. Secure the cables with a clamp for strain relief so they do not slip back down into the wall or furniture. Mud Ring Figure 1.
Installing a Mud Ring Step 3: Change a Faceplate or Button Labels optional Faceplates can easily be changed, if desired. Or you can replace one or more of the labels within the buttons. Some button labels ship with the unit. You can create and print your own customized labels using Extron Button Label Generator software.
Extron MLC Plus MediaLink Plus, - EET Europarts SE
Replacing a faceplate To replace a faceplate: Remove the faceplate by holding the body of the unit with one hand, gripping the sides of the faceplate with the other hand, and pulling the faceplate away from the unit. Align the openings of the new faceplate with the buttons and knob and with the LEDs and place the faceplate against the unit.
The magnetic catches fasten the faceplate onto the unit. The labels can be changed at any time. Follow these steps to change the translucent button labels: Remove the faceplate as mentioned in step 1 of Replacing a faceplate.
For each button label to be replaced, use the provided Extron removal tool to gently separate the clear button cap lens from its white diffuser backing as follows: Remove the label insert from the transparent button cap. Select one of the button labels from the printed label correct label orientation.
MediaLink Plus Controller - MLC Plus 50
Align the cap with the white diffuser and the panel opening, and press the clear cap into place on the button. Reattach the faceplate to the controller see step 2 in Diffuser Insert button label. Remove the label from its backing and remove the clear, protective film from the front of the label. Insert the button label into the button cap.
MLC Plus 50// Series Setup Guide
Check for Base Clear Lens 2 Separate the twopiece button here at the corner. Removal Tool Replacing a faceplate on page 2. The MLC Plus 50 is an easy-to-use Ethernet controller designed for handling common AV functions, such as display on/off, input switching, volume control, and.
The MLC Plus 50 is an easy-to-use pushbutton controller used for common. AV room functions such as display on/off, input switching, volume, and. Ethernet.