Type: Driver
File Name:
File Size: 39.7 MB
18 (3.52)
Downloads: 7
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* (*Free Registration Required)

Download Now

Audible Download Audiobooks. DPReview Digital Photography. Shopbop Designer Fashion Brands. Hold components by the edges to avoid touching the ICs on them. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. The motherboard comes with an onboard standby power LED. Unplug the power cable from the power outlet and make sure that Asus P4R8T standby power LED is OFF before installing any system component. On the rear panel, locate the three screws that secure the cover to the chassis. Use a Phillips cross screw driver to remove the cover screws.

Keep the screws for later use. Pull the cover slightly toward the rear panel until Asus P4R8T side tabs are disengaged from the chassis. Lift the cover, then set aside. See page 39 for details Asus P4R8T the PSU.

Asus P4R8T motherboard - TechSpot Forums

To remove the PSU: Lay the system on its side on a flat, stable surface. Disconnect all power supply plugs in the optical drive and floppy disk drive. Remove the screw that secures the PSU to the chassis. Slide the PSU to the left until the side hook is disengaged from the chassis. Push the PSU towards the front panel for about half an inch. Lift the PSU slightly 6 4 5 Asus P4R8T. Disconnect the power plugs on the motherboard. Set the PSU aside. The unit may accidentally drop and damage the other system components.

To remove the CPU fan and heatsink assembly: Carefully press down the locking lever of the retention bracket 2. Detach the retention bracket hook from the retention module Asus P4R8T by flipping the locking Asus P4R8T to the direction of the arrow. Detach the other retention bracket hook from the hole on the other side of the retention module, then lift.

ASUS Terminator T2-R deluxe black SB/DLX (AB-T2700) User Manual

Do steps to remove the second retention bracket. ASUS Terminator 2 barebone system 4 27 5. Lift the CPU fan and heatsink assembly, Asus P4R8T set aside. Locate the pin CPU socket on the motherboard.

  • Asus P4r8t Motherboard Driver
  • Debian HCL - ASUS / p4r8t
  • Download Drivers: Asus P4R8T Chipset Drivers
  • Windows 8.1 ASUS laptop Cannot find bluetooth
  • ASUS P4R8T Drivers

Position the CPU above the socket such that its marked Asus P4R8T gold mark matches the base of the socket lever. Carefully insert the CPU into the socket until it fits in place.


Push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Asus P4R8T

Acer Veriton M200-A55Shop with confidence
LEADTEK GeForce FX A300Have a question?
Acer Aspire 1810T Notebook Intel 5100530051505350 WLANWrite Your Own Review
HP G72-b54NR NotebookInstallation is Easy with Fast & Professional Support

Align the retention bracket with Asus P4R8T rails on the side of the CPU fan. Attach the retention bracket hook into the retention module hole.

Computer Motherboards eBay

Carefully press down the locking lever on the other side of the retention bracket. Asus P4R8T the locking lever hook into the retention module hole to secure the fan and heatsink assembly in place.


Follow steps 2 to 5 to re-install the second retention bracket. ASUS Terminator 2 barebone system 29 2. Buy the Asus P4R8T Rev Socket Motherboard at Cant find the drivers for Asus P4R8T motherboard Asus P4R8T for windows 7. It doesn't recognize it because it seems the motherboard was not available separately.

(Assuming it will read USB socket without the motherboard driver).

Other Drivers