Type: Driver
File Name:
File Size: 143.6 KB
15 (3.21)
Downloads: 10
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* (*Free Registration Required)

Download Now

All rights reserved. This Synopsys software and all associated documentation are proprietary to Synopsys, Inc. All other use, reproduction, modification, or distribution of the Synopsys software or the associated documentation is strictly prohibited. Destination Control Statement All technical data contained in this publication is subject to the export control laws of the United States of America. Disclosure to nationals of other countries contrary to United States law is prohibited. It is the reader's responsibility to determine the applicable regulations ARC DataBook USB Adapter to comply with them.


Trademarks Synopsys and certain Synopsys product names are trademarks of Synopsys, as set forth at All other product or company names may be trademarks of their respective owners. Third-Party Links Any links to third-party websites included in this document are for your convenience only.

Synopsys does not endorse and is not responsible for such websites and their practices, including privacy practices, availability, and content. Synopsys, Inc.

Replace receiver for Arc Touch Mouse - Microsoft Community

Version 3 Contents 1 Preface Version 9 1 Preface This chapter outlines the ARC DataBook USB Adapter structure and provides a brief chapter overview. Additionally, it contains a list of available resources and other supporting documents. Document Structure This document consists of the following chapters: Preface Overview of the available documentation and its organization. Glossary and References List of abbreviations, terms, and external references. Version Synopsys, Inc. Note One of the following toolchains: Make sure that you are using latest version of Adept driver. Unpack the Package Contents 2. Connect the USB Cable 4. Connect the Power Supply 5. Default Board Settings This section describes default settings for links and switches on the board.

ARC EM Starter Kit User Guide. Version January 2016

The configuration loading process might take up to five seconds after the board is powered on. After the configuration is loaded, the ARC EM processor performs a self-test as described in the Run the bootloader and initial self-test section. For ARC DataBook USB Adapter description of all the supported configurations and instructions on how to select a configuration other than the default configuration, see Working with ARC EM Starter Kit on page Next Steps: Connect the USB Cable.

The driver is a part of the Digilent Adept System tool and can be downloaded from the Digilent web site at Follow the installation instructions provided by Digilent. Connect the mini-usb plug to ARC DataBook USB Adapter connector J7 on the board as shown on Figure Connect the other end of the cable to the host running the debugger. This is the factory default setting.

Connect the appropriate AC plug for your AC power outlet. Finally, connect the AC plug to your AC power outlet. It does not have any useraccessible means to change power-supply settings. Run the bootloader and initial self-test.


Bit 3 skip self-test. When this bit is on, the bootloader application does not check CPU ID and does not send any messages to the console.

DesignWare ARC EM Starter Kit

The self-test performs the following actions: ARC EM Databook. 2. MetaWare docs. 3.

HP Compaq 14 NotebookQuestion Info
Lexmark X2330 Printer
Gigabyte GA-A75-UD4H OnOff Charge
ASUS Transformer Book TX300 ASIX LAN

ARC EM Digilent Adept Software for Digilent JTAG-USB cable driver. All the supported boards are. Use the USB cable delivered as part of the ARC EM Starter kit. 1.

to Synopsys DesignWare DW_apb_uart Databook [8] for more information (including a.

Other Drivers