BIOSTAR A780L3C VER. 7.0 AMD RAID DRIVER DETAILS:
|File Size:||39.3 MB|
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* (*Free Registration Required)|
BIOSTAR A780L3C VER. 7.0 AMD RAID DRIVER
There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose.
Specs Biostar AL3C Ver. 7.x Socket AM3 AMD G Micro ATX Motherboards (AL3C)
Biostar A780L3C Ver. 7.0 AMD RAID the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. All the brand and product names are trademarks of their respective companies. Specifications In Other Languages Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on the edge, do not try to bend or flex the board. Loose parts will cause short circuits which may damage the equipment.
Biostar A780L3C Ver. 7.2 AMD RAID Preinstall Driver for Windows 7 64-bit
Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit 1. Biostar A780L3C Ver. 7.0 AMD RAID package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative.
Locate the CPU socket on the motherboard Step 2: Pull the socket locking out from the socket and then raise the lever up to a degree angel. Look for the Biostar A780L3C Ver. 7.0 AMD RAID triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Hold the CPU down firmly, and then close the lever to locked the position 2. Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug.
Hook the spring clip to the mounting-lug. On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops.
Biostar A780L3C драйверы
Do not forget to connect the CPU fan connector. For proper installation, please kindly refer to the installation manual of your CPU heatsink. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin 1. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Biostar A780L3C Ver. 7.0 AMD RAID and should be connected to GND. Unlock a DIMM slot by pressing the retaining clips outward.
Biostar AL3C драйверы
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. PCI-Express supports a raw bit-rate of 2. AMD G+SB AMD® G Chipset is designed with up to MT/s HyperTransport™ (HT) interface and PCI ExpressTM x 16 graphics.
AM3 95W CPU : Realtek RTLT - 10/ Controller. AMD Socket AM3 AL3G Ver. 6.x gaming motherboard's spec: Socket AM3; Supports AMD Phenom II/Athlon II/Sempron Processors; Supports AMD.