Type: Driver
File Name: 3com_tokenlink_65381.zip
File Size: 9.4 MB
21 (4.71)
Downloads: 17
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

These distribution specific tools are beyond the scope of this document, but 3Com TokenLink III 3C619 can always directly modify the modules. Kernel modules aliases are utilized to associate a particular name with a kernel module. For token ring, this is used to assign drivers for each of the token ring interfaces so that the system scripts know which driver to insert when you bring an interface up.

TOKENLINK III 16/4 (3C) Network Card Settings and Configuration

The format of the alias lines are: Kernel modules parameters are specified in the following format: See either the following sections for driver specifics or check out the drivers source code. For example, if 3Com TokenLink III 3C619 wanted to set the Olympic driver to 16 mbps operation and with a default buffer size of bytes, 3Com TokenLink III 3C619 would use the following line: The latest drivers for the Turbo Adapters will recognize these adapters and configure them straight out of the box. You may have to either turn off isapnp support in the kernel or modify your isapnp.

Perusal of the ibmtr source code may leave you to believe that the adapter can take three parameters, however, in reality the driver doesn't take any.

The information on these options are included here for completeness only. This location is found using the new turbo detection code and no parameters are required. The two options 3Com TokenLink III 3C619 used to tell the driver exactly which irq to use and where the shared ram for the adapter could be found.

  • PC Mag - Google Livros
  • 3Com - Complete Hardware Parts & Specification list Page - 32
  • Download 3Com TokenLink Velocity XL (3C) driver Network card free software
  • Index by company
  • 3Com Part Numbers List on Page 22
  • X86 only: Driver Support
  • Network TokenRing. 16-bit ISA

These two options are now totally redundant in the driver as the interrupt line and the location of the shared ram is obtained directly by interrogating the adapter. The driver accepts four options: These options can be specified differently for each card found, i.

A little trial and error may be required to be certain which adapter is receiving which configuration option. Has one of three settings 0 default4 or The card will fail if you try to insert it at 3Com TokenLink III 3C619 wrong speed. The main purpose for explicitly setting the ring speed is for when the card is first on the ring.


In autosense mode, if the card cannot detect any active monitors on the ring it will not open, so you must re-init the card at the appropriate speed. Unfortunately at present the only way of doing this is rmmod and 3Com TokenLink III 3C619 which is a bit tough if it is compiled in the kernel. The driver does support mbps full duplex operation.

This is automatically detected by the adapter when connected to an appropriate switch. This is this initial receive buffer allocation size.


This will default to if no value is entered. You may increase performance of the driver by setting this to a value larger than the network packet size, although the driver now re-sizes buffers based on MTU settings as well. Controls level of messages created by the driver. Defaults to 0 which only displays start-up and critical messages.

3com Computer Hardware Part Catalog 32

Presently any non-zero value will display all soft messages as well. NB This does not turn debugging messages on, that must be done by modified the source code. 3Com 3C TokenLink III 16/4 ISA Adapter.

Card Only No Drivers or Software. Find many great new & used options and get the best deals for 3C 3Com TokenLink III Token Ring 16/4 ISA Adapter With Disks Manuals at the best online.


Other Drivers