ACER AL1502 DRIVER DETAILS:

Type: Driver
File Name: acer_al1502_30279.zip
File Size: 29.3 MB
Rating:
4.55
23 (4.55)
Downloads: 16
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now
ACER AL1502 DRIVER



Page 4 AL 3. And a 12V power supply for audio function.

ACER AL1502 WINDOWS 8.1 DRIVER

It Acer AL1502 generated from the P connector. Q, I Based on this conversion, this device performs interpolation during pixel extension. These interpolation digital data are transformed to LVDS signal.

ACER AL1502 DRIVERS UPDATE

The I source voltage is 3. The device control signal Acer AL1502 from MCU through the 3-wire bus.

  • LCD Pesquisa - Esquemas - Eletronica PT
  • Acer AL AL (ET.L) - S/N Lookup
  • Specification - Acer AL User Manual [Page 16]
  • Acer AL AL1502 (Monitor)
  • Diagramas na base de dados - Diagrams in database
  • Acer AL AL1502 (ET.L3004.002)

The I scaler has support OSD function. The output voltage is 5 voltage. Control is give effect to for the push switch to be used Acer AL1502 the user changes the parameters, in order to modify the respective setting values.

Whether the switch has been pressed is identified with the Acer AL1502 input level that is turned L. Each switch input port is pulled up at outside of MCU.

Related ports of I based on Table 1. Table 1 Related ports of I Pin No. Can use ISP function for firmware modification.

Y Acer MONITOR Driver Download

It is generated from the P connector. Acer AL1502, I Based on this conversion, this device performs interpolation during pixel extension. These interpolation digital data are transformed to LVDS signal. The I source voltage is 3. The device control signal is from MCU through the 3-wire bus. The I scaler has support OSD function. The output voltage is 5 voltage. Control is give effect to for the push switch to be used when the user changes the parameters, in order to modify the respective setting values. Whether the switch has been pressed is identified with the switch input level that is turned L. Each switch input port is pulled up at outside of MCU.

Related ports of I based on Table 1. Table 1 Related ports of I Audio control function The I MCU output signal control audio mute and power, the pin33 is mute signal, the pin32 is controlled audio power signal.

ACER AL1502 WINDOWS DRIVER DOWNLOAD

Can use ISP function for firmware modification. It is same of the IIC data bus. I pin4 and pin9 is audio input port. I pin14 and pin17 is audio output port. I pin 12 is mute input from Acer AL1502 MCU.

Drivers for manufacturers Acer to Monitors

The identification is made when the power supply is turn off. If the power supply is turned off by pulling out the power cord, then this power supply can be turned on by connecting Acer AL1502 power cord, without pressing the POWER switch. Final identification can be made by examining the coincidence of the obtained figure with the number of lines for the mode identified from the frequency. The Distinction Hsync and Vsync of each mode is shown in Table 3. When the detected frequency if the sync signal has changed, the total number of lines should be counted even through it is range identified frequency in the same mode.

Vertical frequency: Horizontal frequency: If there is no horizontal sync signal input. If there is no vertical sync signal input. If the horizontal sync signal is outside the measuring range of MSTB. If the vertical sync signal is outside the measuring range of MSTB. Resolution x 70Hz x Phones Laptops Computers & Tablets Electronics Car Electronics Hardware Components.

General characteristics Acer AL Comments, questions and answers to Acer AL Acer AL Pdf User Manuals. View online or download Acer AL User Manual.

Other Drivers